VICTRON Battery Protect 12/24V 100A

SKU: BPR000100400

$106.04

or 4 fortnightly payments of $26.51 with Afterpay More info

The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

In stock

Description

12/24V auto ranging
The VICTRON Battery Protect 12/24V 100A automatically detects system voltage

Programming made easy
The VICTRON Battery Protect 12/24V 100A can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen.

A special setting for Li-ion batteries
In this mode the BatteryProtect can be controlled by the VE.Bus BMS.
Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual.
Ultra low current consumption
This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.
Over voltage protection
To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.

Ignition proof
No relays but MOSFET switches, and therefore no sparks.

Delayed alarm output
The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.

Delayed load disconnect and delayed reconnect
The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

 

 

Why Bainbridge Technologies is Australia’s leading Power Product Experts…

Supporting business partners with innovative power solutions that help overcome the economic, and competitive environments in which they operate, Bainbridge Technologies are the trusted name in 12 volt and power product solutions.

Expanding significantly into lithium battery systems, Bainbridge Technologies offers an extensive range of 12v, 24v, and 48v lithium battery systems to suit Automotive, Marine, Caravan, and Commercial applications.

With an expert sales team at the helm, Bainbridge Technologies’ highly qualified, multidisciplinary team is here to help you or your business.

Reviews

There are no reviews yet.

Be the first to review “VICTRON Battery Protect 12/24V 100A”

Your email address will not be published. Required fields are marked *